60 MHz Digital Storage Oscilloscope
Description
60 MHz digital storage oscilloscope (DSO) stores and analyses the signal digitally rather than using analogue techniques. After the collected analog voltage signals are converted to digital signals, the internal computer of digital oscilloscope makes analysis, processing, storage, display and printing operations. It is widely used in science, pharmacy, engineering and telecommunication industries. It is a kind of portable oscilloscope.
Advantages
1. 60 MHz digital storage oscilloscope (DSO) can build waveforms after the signal is digitized and the machine also has the functions of memorizing and storing the observed signals.
2. The highest sampling rate of digital oscilloscope is up to 1GS/s thus it’s not prone to produce signal aliasing.
3. Sampling oscilloscope has very high bandwidth and the maximum is up to 60 MHz.
4. 60 MHz digital storage oscilloscope has more trigger modes such as pre-trigger, logic trigger and pulse width trigger.
5. It has powerful waveform processing ability and is able to measure frequency, rise time and pulse width automatically.
6. Sampling oscilloscope can be connected to the computer as well as print, archive and analyze documents.
Parameters of 60 MHz Digital Storage Oscilloscope
| Display | 5.7 inches (STN), Resolution: 320×240 With “A”: Mono With “CA”: Color |
| Channels | 2 + Ext. trigger |
| Bandwidth | 60MHz |
| Rise Time | 5.8ns |
| Real Time Sampling Rate | 1GS/s |
| Equivalent Sampling Rate | 50GS/s |
| Input Impedance | 1MΩ ± 2%, 15pF ± 2% |
| Input Coupling | DC,AC,GND |
| Memory Depth | 4kpts |
| Vertical Sensitivity | 2mV/div - 5V/div |
| Vertical Accuracy | ±4% (2mV/div - 5mV/div) ±3% (10mV/div - 5V/div) |
| Vertical Resolution | 8 bits |
| Acquisition Modes | Auto, Normal, Single |
| Trigger Modes | Edge, Video, Pulse, Delay |
| Trigger Sources | CH1, CH2, EXT, EXT/5, EXT(50Ω) |
| Trigger Sensitivity | 1div (DC-10MHz), 1.5div (10MHz-full bandwidth) |
| Time Base | 5ns/div to 50s/div |
| Horizontal Accuracy | ±0.01% |
| BW Limited | 20MHz |
| Max. Input Voltage | 400V (DC+ACpeak) |
| Auto Measurements | VPP, Vamp, VRMS, VMAX, VMIN, VTOP, VBASE, VAVG, Freq, Period, Rise time, Fall time, +Width, -Width, Overshoot, +Duty,-Duty |
| Math | +, -, ×, ÷, FFT |
| Storage | 10 sets of waveform and 10 sets of setup |
| FFT | Windows: Hanning, Hamming, Blackman-Harris, Rectangular Sample points: 1024 pts |
| X-Y | Bandwidth: 25MHz/40MHz/60MHz/100MHz/150MHz/200MHz Phase difference: ±3° |
| PC Interface | USB |
| Power Supply | 100-240V AC, 40VA Max. |
| Accessories | Power cord, Probe×2 |
| Dimension | 303(W) × 145(H) × 150(D) mm |
| Weight | 4.5kg |
Notes
1. 60 MHz digital storage oscilloscope (DSO) should be equipped with suitable line voltage.
2. To avoid electrical shock, the protective grounding conductor of power cord should be connected to ground.
Maintenance
1. To maintain good ventilation, regular cleaning should be carried out.
2. Do not spray cleaner directly onto the instrument when cleaning it. Please use a soft cloth with mild detergent and water instead.
- 100 MHz Digital Storage Oscilloscope100 MHz digital storage oscilloscope (Model: DS-2100CA) stores and analyses the signal digitally rather than using analogue techniques. The input analogue signal is sampled and then converted into a digital record of the amplitude of the signal at each sample time. Digital oscilloscope is now the most common type of oscilloscope in use because of the advanced...