100 MHz Digital Storage Oscilloscope
Description
100 MHz digital storage oscilloscope (Model: DS-2100CA) stores and analyses the signal digitally rather than using analogue techniques. The input analogue signal is sampled and then converted into a digital record of the amplitude of the signal at each sample time. Digital oscilloscope is now the most common type of oscilloscope in use because of the advanced trigger, storage, display and measurement features.
Application
100 MHz digital storage oscilloscope is widely used in science, pharmacy, engineering and telecommunication industries.
Features
1. This dual trace digital oscilloscope has more than 20 automatic measurements.
2. 100 MHz digital storage oscilloscope is simple to operate. All the operation processes are completed in the faceplate so that the waveform responses in a quick manner.
Parameters of DSO
| Display | 5.7 inches (STN), Resolution: 320×240 With “A”: Mono With “CA”: Color |
| Channels | 2 + Ext. trigger |
| Bandwidth | 100MHz |
| Rise Time | 3.5ns |
| Real Time Sampling Rate | 1GS/s |
| Equivalent Sampling Rate | 50GS/s |
| Input Impedance | 1MΩ ± 2%, 15pF ± 2% |
| Input Coupling | DC, AC, GND |
| Memory Depth | 4kpts |
| Vertical Sensitivity | 2mV/div - 5V/div |
| Vertical Accuracy | ±4% (2mV/div - 5mV/div) ±3% (10mV/div - 5V/div) |
| Vertical Resolution | 8 bits |
| Acquisition Modes | Auto, Normal, Single |
| Trigger Modes | Edge, Video, Pulse, Delay |
| Trigger Sources | CH1, CH2, EXT, EXT/5, EXT(50Ω) |
| Trigger Sensitivity | 1div (DC-10MHz), 1.5div (10MHz-full bandwidth) |
| Time Base | 2ns/div to 50s/div |
| Horizontal Accuracy | ±0.01% |
| BW Limited | 20MHz |
| Max. Input Voltage | 400V (DC+AC peak) |
| Auto Measurements | VPP, Vamp, VRMS, VMAX, VMIN, VTOP, VBASE, VAVG, Freq, Period, Rise time, Fall time, +Width, -Width, Overshoot, +Duty,-Duty |
| Math | +, -, ×, ÷, FFT |
| Storage | 10 sets of waveform and 10 sets of setup |
| FFT | Windows: Hanning, Hamming, Blackman-Harris, Rectangular Sample points: 1024 pts |
| X-Y | Bandwidth: 25MHz/40MHz/60MHz/100MHz/150MHz/200MHz Phase difference: ±3° |
| PC Interface | USB |
| Power Supply | 100-240V AC, 40VA Max. |
| Accessories | Power cord, Probe×2 |
| Dimension | 303 (W) × 145 (H) × 150 (D) mm |
| Weight | 4.5 kg |
Cautions
1. Avoid hot and humid places and frequent start-up and shutdown.
2. When operator observes the bright spot in the screen and makes adjustments, its brightness should be moderate.
3. 100 MHz digital storage oscilloscopes should avoid moisture, dropping and dust.
Maintenance
1. To maintain good ventilation, regular cleaning should be carried out.
2. Do not spray cleaner directly onto the instrument when cleaning it. Please use a soft cloth with mild detergent and water instead.
- 150 MHz Digital Storage OscilloscopeOscilloscopes are used to observe the change of an electrical signal over time. 150MHz digital storage oscilloscope stores and analyses the signal digitally rather than using analogue techniques. It is now the most common type of oscilloscope in use because of the advanced trigger, storage, display and measurement features. Digital oscilloscope includes...